 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TEN 30 Series, 30 Watt Features Smallest encapsulated 30 W converter 2'' x 1'' x 0.4'' shielded metal package with isolated baseplate pending Single- and dual output models I/O isolation voltage 1500 VDC Excellent efficiency up to 91 % Operating temp. range -40 C to +85 C Remote On/Off Over-temperature protection 3-year product warranty The TEN-30 series is the latest generation of high performance dc-dc converter modules setting a new standard concerning power density. This product with 30W comes in an encapsulated, shielded metal package with a footprint of only 1.0" x 2.0". All models have wide 2:1 input voltage range and precisely regulated, isolated output voltages. Advanced circuit topology provides high efficiency up to 91% which allows an industrial operating temperature range of -40C to +85C (with derating). Further features include remote On/Off, trimmable output, under-voltage lockout and overtemperature protection. Typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Ordercode TEN 30-1207 TEN 30-1209 TEN 30-1210 TEN 30-1211 TEN 30-1212 TEN 30-1213 TEN 30-1221 TEN 30-1222 TEN 30-1223 TEN 30-2407 TEN 30-2409 TEN 30-2410 TEN 30-2411 TEN 30-2412 TEN 30-2413 TEN 30-2421 TEN 30-2422 TEN 30-2423 TEN 30-4807 TEN 30-4809 TEN 30-4810 TEN 30-4811 TEN 30-4812 TEN 30-4813 TEN 30-4821 TEN 30-4822 TEN 30-4823 http://www.tracopower.com Input voltage Output voltage 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 8`500 mA 8`000 mA 7`500 mA 6`000 mA 2`500 mA 2`000 mA 3`000 mA 1`250 mA 1`000 mA 8`500 mA 8`000 mA 7'500 mA 6`000 mA 2`500 mA 2`000 mA 3`000 mA 1`250 mA 1`000 mA 8`500 mA 8`000 mA 7`500 mA 6`000 mA 2`5000 mA 2`000 mA 3`000 mA 1`250 mA 1`000 mA Efficiency typ. 79 % 84 % 85 % 87 % 89 % 89 % 87 % 87 % 87 % 80 % 85 % 87 % 90 % 91 % 91 % 90 % 89 % 90 % 80 % 85 % 87 % 89 % 91 % 91 % 90 % 88 % 89 % Page 1 of 4 9 - 18 VDC (nominal 12 VDC) 18 - 36 VDC (nominal 24 VDC) 36 - 75 VDC (nominal 48 VDC) DC/DC Converters TEN 30 Series, Input Specifications Input current at no load 12 V; 12 / 15 Vout 12 V; other 24 V; 12 / 15 Vout 24 V; 12 / 15 Vout 24 V; other 48 V; 12 / 15 Vout 48 V; other 12 V;.1.5 Vout 12 V;.2.5 Vout 12 V;.3.3 Vout 12 V; other output 24 V;.1.5 Vout 24 V;.2.5 Vout 24 V;.3.3 Vout 24 V; other output 48 V;.1.5 Vout 48 V;.2.5 Vout 48 V;.3.3 Vout 48 V; other output models: models: models: models: models: models: models: models: models: models: models: models: models: models: models: models: models: models: models: 50 mA max. 100 mA max. 30 mA max. 30 mA max. 70 mA max. 30 mA max. 45 mA max. 1400 mA typ. 2100 mA typ. 2700 mA typ. 3000 mA typ. 700 mA typ. 1000 mA typ. 1300 mA typ. 1500 mA typ. 350 mA typ. 500 mA typ. 650 mA typ. 750 mA typ. 30 Watt Input current at full load Start-up voltage / under voltage shut down Surge voltage (100 msec. max.) 12 V models: 9 VDC / 8 VDC typ. 24 V models: 18 VDC / 16 VDC typ. 48 V models: 36 VDC / 32 VDC typ. 12 V models: 25 V max. 24 V models: 50 V max.. 48 V models: 100 V max. EN 55022 class A with input capacitor 12 V models: 10 F / 25 V 1812 MLCC 24 V models: 4.7 F / 50 V 1812 MLCC 48 V models: 2.2 F / 100 V 1812 MLCC 1 % 10 % (only for single output models) - - - - - Input variation Vin min. to Vin max. Load variation 0 - 100 % single output models dual output models balanced load dual output models unbalanced load (25% /100%) 0.2 % max. 0.5 % max. 1.0 % max. 5.0 % max. not required 0.02 %/K 100 mVpk-pk max. (150 mVpk-pk for 12/12/15/15V models) 30 ms typ. 250 s typ. indefinite, automatic recovery 150% of Iout max. typ. @ 115 C typ. 1.5 2.5 3.3 5.1 12 15 VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: 2.0 V 3.3 V 3.9 V 6.2 V 15 V 18 V Conducted noise (input) Output Specifications Voltage set accuracy Output voltage adj. range Regulation Minimum load Temperature coefficient Ripple and noise (20 MHz Bandwidth) Start up time (nominal Vin and constant resistive load) Transient response time (25% load change) Short circuit protection Over load protection Thermal shutdown Over voltage protection All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TEN 30 Series, General Specifications Capacitive load 1.5 / 2.5 / 3.3 5.1 12 15 5 12 15 - Operating - Case temperature - Storage Vout Vout Vout Vout Vout Vout Vout models: models: models: models: models: models: models: 20'000 F 14'400 F 3'000 F 2'000 F 3'000 F 2'000 F 1'300 F - 40 C to +85 C +100 C max. - 55 C to +125 C 4 %/K above 65C 5 % to 95 % rel H max. - Natural convection - Natural convection with heat sink - Input/Output - Input/Output - Input/Output (500 VDC) - On: - Off: - Standby current: 12 C/W 10 C/W 550'000 h 1`500 VDC 1500 pF max. >1'000 MOhm 3 to 12 VDC or open circuit. 0 to 1.2 VDC or short circuit pin 3 and pin 2 3 mA max. 430 kHz typ. (puls width modulation) MIL-STD-810E UL /cUL 60950-1, IEC/EN 60950-1 compliance UL (File no.: tba) 30 Watt Temperature ranges Load derating Humidity (non condensing) Thermal inpedance Reliability, calculated MTBF (MIL-HDBK-217F, @ 25C, ground benign) Isolation voltage (60 sec.) Isolation capacity Isolation resistance Remote On/Off: Switching frequency (fixed) Vibration and thermal shock Safety standards Safety approvals Output Voltage Adjustment Trim up Trim Trim down +Vout Ru - Vout Ru [kohm] output +5% +10% 1.5 2.5 0.56 4.3 0.051 0.33 3.3V 6.8 0.75 Rd Nominal output voltage at open Trim input! Trim Rd [kohm] 5.1V 5.1 0.75 12V 43 4.3 15V 47 1.8 output -5% -10% 1.5 2.5 0.68 6.2 0.062 0.75 3.3V 8.2 0.62 5.1V 6.2 0.82 12V 56 5.6 15V 56 2.2 Physical Specifications Case material Baseplate Potting material Weight Soldering temperature copper, nickel plated non conductive FR4 epoxy (UL 94V-0 -rated) 31 g (1.1 oz) max. 265C / 10 sec. All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TEN 30 Series, Outline Dimensions 15.24 (0.6) 30 Watt 5.08 (0.2) 2.54 (0.1) Pin-Out Pin 1 2 3 4 5 6 Single +Vin (Vcc) -Vin (GND) + Vout -Vout Trim Dual +Vin (Vcc) -Vin (GND) + Vout Common -Vout 3 21 45.72 (1.8) 50.8 (2.0) Bottom View Remote On/Off 2.5 (0.1) 6 5.6 (0.22) 5 10.16 (0.4) 4 10.2 (0.4) 20.32 (0.8) Dimensions in [mm], () = Inch Pin diameter: 1.0 0.1 (0.04 0.004) Pin pitch tolerances: 0.25 (0.01) Case tolerances: 0.5 (0.02) Heat-Sink (Option) Order code: TEN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 17g (0.60oz) without converter Thermal impedance after assembling: 10 K/W Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 16.8 (0.66) max. Specifications can be changed any time without notice. Rev. 07/08.1 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com 14.5 (0.57) Page 4 of 4 |
Price & Availability of TEN3008
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |